Surface pump IBO MH 1300 (230V) with accessories

IBO surface, multi-stage pump with accessories for pumping clean and cold water MH 1300 (1300 W), with noryl impellers (230V)

Dambat, is a leading and respected, Polish manufacturer of pumps and pumping systems with a wide range of applications in households, agriculture, as well as industry. For many years, the IBO brand has provided reliable systems for efficient water distribution.

Surface (hydrophore) pump, multi-stage IBO MH 1300 with accessories is a device with a wide range of applications and high efficiency, characterized by many years of reliable performance during operation. This model as a foundation is often connected to hydrofoil sets with a pressure tank. The pump is equipped with a system that raises the suction capacity to a maximum depth of 8 meters with the use of a Venturi tube, supporting the suction of the device. It is designed for cold and clean water, free of abrasive and long-fibered solids, lifting up to 55 meters and pumping up to 100 l / min. The model has a single-phase motor (230 volts) with 1300 watts of power, and is easy to operate and install. Quiet operation of the device is its advantage.

The multi-stage pump is based on the operation of the device with different power. If you want to use less power and need a gentle stream of water, you turn the tap slightly. With more pressure and more power, the tap needs to be turned more. It all depends on the need we have for water.

The MH 1300 pump by IBO, together with the installed accessories, is already prepared for connection to a hydrophore tank. If you already have a tank after the old set, it is enough to buy the presented model. The five-way pressure gauge mounted on the discharge outlet and the pressure switch located in the accessory gives you the opportunity to automatically control the pump (switching on, as well as switching off the hydrophore set complete with surface pump). Switching on is interdependent on the drop of water pressure in the system below the set minimum pressure and the creation of flow in the system. The device will turn off when it senses that the flow has stopped.

The pump's hydraulics are made of high-quality materials. Its housing and shaft and rotor were made of stainless steel, a durable material that resists corrosion. The impellers were created from noryl, a hard, durable plastic, and the pump's suction body was made of cast iron. The MH 1300 model is a solidly built pump, equipped with thermal protection mounted in the motor winding to protect it from overheating. The presented model is also available with a three-phase motor in our offer or in hydrophore sets with a diaphragm tank (24, 50, 80 and 100 - liter).

PURPOSE OF IBO MH 1300 PUMP WITH ACCESSORIES

Multistage surface pump IBO MH 1300 (230V) is designed for pumping clean and cold water from own intakes and raising pressure. Hydrophore (suction) pumps are used to transport liquids with sufficient capacity and pressure. It is recommended to all owners of their own water intake. The device will prove useful in water supply and hydrophore systems by supplying drinking and utility water, as well as in irrigation systems for land irrigation. We will use the equipment when pumping water from wells with good performance. It is worth buying an anti-sand filter for the pump, allowing to catch small impurities in the well and extend the life of the device. The MH 1300 model shows good performance, it is a practical equipment for supplying domestic and agricultural water in households, as well as in smaller businesses or service outlets, wherever considerable water pressure is required. Thanks to the high pressure, we can get a long stream of water, so useful for hand watering plants and lawns with a hose. We will mount the pump with accessories to a pressure tank, creating a hydrophone set and using a hydrophone for single-family housing, multi-family housing and for irrigation. We will use the IBO MH 1300 multi-stage surface pump wherever high capacity is needed. The pump will prove itself when working with a tank in a hydrophore set or a hydrophore machine.

MAIN FEATURES OF THE IBO MH 1300 PUMP

• Possibility to work with a tank together with accessories or a hydrophore automatic machine

• Ability to suction from a depth of max.8 m

• High capacity and high pressure

• With Venturi tube (system to increase suction capacity)

• Built-in thermal protection in the motor winding

• Housing (stainless steel)

• Shaft and rotor (stainless steel)

• Rotors (noryl)

• Suction body (cast iron)

• Small size of the device

ACCESSORIES INCLUDE:

• pressure switch

• manometer

• five-way pressurized outlet

• power cord with plug

BENEFITS

	High performance
	Quiet operation
	INOX body
	2 year warranty