Surface pump IBO MHI 1300 (230V)

MHI 1300 (1300 W) multistage surface pump for pumping clean and cold water, with noryl impellers

IMPORTANT INFORMATION

Dambat is a leading and respected Polish manufacturer of pumps and pump systems with a wide range of applications in the household, agriculture and industry. The IBO brand has been providing reliable systems for efficient water distribution for many years.

The IBO MHI 1300 multi-stage surface (hydrophore) pump is a high-performance device distinguished by many years of reliable operation during operation. Equipped with a system that increases the suction capacity to a depth of max. 8 meters with the use of a Venturi tube, supporting the suction of the device. It is designed for cold and clean water, free of solids with abrasive and long-fiber properties, lifting it to a height of up to 55 meters and pumping up to 100 l / min. The pump has a single-phase motor (230 V) with a power of 1300 W, it is easy to use and install. The great advantage of the model is the quiet operation of the device.

The multi-stage pump is based on the operation of the device with different power. If you want to use less power and need a gentle stream of water, turn the tap on slightly. With higher pressure and higher power, the tap should be turned on more. It all depends on the need we must have for water.

The pump hydraulics are made of durable corrosion-resistant materials. Its housing, shaft and rotor are made of stainless steel. The impellers are made of noryl, a hard, durable material, and the suction body of the pump is made of cast iron. The MHI 1300 model is a solidly constructed pump, equipped with thermal protection mounted in the motor winding to protect it against overheating. The presented model is also available in our offer with accessories and in a small, medium and large hydrophore set (24, 80, 100 liters).

PURPOSE OF THE IBO MHI 1300 PUMP

The IBO MHI 1300 multistage surface pump is designed for pumping clean and cold water from own intakes and for increasing pressure. Hydrophore (suction) pumps are used to transport liquids with appropriate efficiency and pressure. The device will work in water supply and hydrophore installations by supplying drinking and utility water and in irrigation systems for watering gardens. We will also use the equipment for pumping water from water reservoirs and wells, and we will also use the device for filling the pool with water and pumping it out after the season. It is worth buying an anti-sand filter for the pump, which will extend the life of the device by catching small impurities in the well, tank or pool. The MHI 1300 model shows good operating parameters, it is a practical equipment for supplying domestic and agricultural water, as well as in smaller enterprises or in service outlets, wherever high water pressure is required. The pump is often installed together with a diaphragm (pressure) tank as a hydrophore set, using a hydrophore for the needs of single-family and multi-family housing and for irrigation. The IBO MHI 1300 multistage surface pump can be used wherever high efficiency is needed. The pump will work well when working with a tank in a hydrophore set or a hydrophore automaton.

MAIN FEATURES OF THE IBO MHI 1300 PUMP

• Possibility of working with a tank with accessories or a hydrophore machine

• The ability to suck from a depth of max. 8 m

• High capacity and high pressure

• With Venturi tube (suction enhancing system)

• Built-in thermal protection in the motor winding

• Housing (stainless steel)

• Shaft and rotor (stainless steel)

• Rotors (noryl)

• Suction body (cast iron)

• Small dimensions of the device

ADVANTAGES

	High performance
	Quiet operation
	INOX body
	2 years warranty