IBO MHI 1300 Inox hydrophore set + 24 L tank

Hydrophore IBO MHI 1300 INOX with hydrophore tank with a capacity of 24 liters, stainless steel impellers

IMPORTANT INFORMATION:

Dambat, is a leading and respected, Polish manufacturer of pumps and pumping systems with a wide range of applications in households, agriculture, as well as industry. The IBO brand has been providing reliable systems for efficient water distribution for many years.

Hydrophore set (hydrophore) consisting of surface pump IBO MHI 1300 INOX with accessories and horizontal diaphragm tank with a capacity of 24 l, is a high-quality device with a 1300 W single-phase motor (230 V). The pump is equipped with a system that raises the suction capacity to a maximum depth of 8 meters with the use of a Venturi tube, supporting the suction of the device. Equipment with simple operation, as well as installation is designed for cold and clean water, lifting up to 55 meters and pumping up to 100 l / min. A great advantage of the model is the quiet operation of the device, allowing the installation of the hydrophore inside the room.

The multi-stage pump is based on the operation of the device with different power. If you want to use less power and need a gentle stream of water, you turn the tap slightly. With more pressure and more power, the tap needs to be turned more. It all depends on the need we have for water.

The IBO MHI 1300 INOX multi-stage surface pump is characterized by its durable and robust construction. Its housing, shaft and rotor, as well as 5 durable impellers are made of excellent quality stainless steel, resistant to corrosion - a great asset of the model. Meanwhile, the pump's suction body is made of cast iron. The MHI 1300 INOX model is a solidly built pump with high efficiency, distinguished by many years of reliable performance during operation. It is also equipped with thermal protection mounted in the motor winding to protect it from overheating. The presented model is available in our offer with different capacity of diaphragm tank (24, 80 and 100 - liter). The size of the tank is selected according to our individual needs.

The pressure switch gives you the ability to automatically turn on as well as off the hydrofoil set complete with surface pump, eliminating the problem of uncontrolled switching on and off of the water pump. It is the pressure regulator of the hydrophore, responsible for turning the pump on and off at the right time. The diaphragm tank is responsible for maintaining a constant water pressure level in the water system. It should be remembered that the correct regulation of the pressure switch is a prerequisite for the proper functioning of the entire hydrofoil set, and it makes the water flow from all points of the liquid reception at the same pressure.

The 24-liter tank in the presented hydrophore is made of thick carbon steel coated with a special varnish to protect the device from corrosion, designed for storing clean water. Inside the tank there is an EPDM rubber diaphragm forming a membrane between the water inside the device and the tank's outer shell. Between the casing and the membrane of the tank is located compressed air, which releases water from the tank under pressure. A special valve is used in the device, which helps to pump or drain the air from the container (located under the cap in the tank). The use of reservoirs in hydrofoil sets helps reduce the number of pump starts in a given period, which translates into the life of the entire system.

PURPOSE OF THE PUMP IBO MHI 1300 INOX WITH ACCESSORIES AND TANK (HYDROPHORE SET 24 L)

Hydrophore set with multi-stage surface pump (hydrophore) IBO MHI 1300 INOX is designed for raising pressure, as well as pumping clean and cold water from own intakes free of abrasive and long-fibered solids. Surface pumps in hydrophore sets are used to transport liquids with sufficient capacity and pressure. Hydrophore is a reliable and highly efficient device with a wide range of applications for the automatic supply of water to rooms and places. The equipment will prove useful in water supply and hydrophore systems by supplying drinking and utility water, as well as in irrigation systems for garden irrigation. The model will also be used for pumping water from water reservoirs and wells, as well as using the device for filling the pool with water and pumping it out after the season. It is worth buying an anti-sand filter for the pump, which will extend the life of the device, catching small impurities found in the well, tank or pool. The MHI 1300 INOX model demonstrates good performance, it is a practical equipment for supplying domestic and agricultural water in households, as well as in smaller businesses or service points, wherever a lot of water pressure is required and a high capacity is needed. We will use the MHI 1300 INOX hydrophore set for single-family and multi-family housing and irrigation.

MAIN FEATURES OF THE IBO MHI 1300 INOX PUMP

• Possibility to work with a tank together with accessories or a hydrophore automatic machine

• Ability to suction from a depth of max.8 m

• High capacity and high pressure

• With Venturi tube (system to increase suction capacity)

• Built-in thermal protection in the motor winding

• Housing (stainless steel)

• Shaft and rotor (stainless steel)

• Rotors (stainless steel)

• Suction body (cast iron)

• Small size of the device

THE MHI 1300 INOX HYDROPHORE SET INCLUDES:

• MHI 1300 INOX pump

• 24L diaphragm tank

• Pressure switch

• Pressure gauge

• Five-way discharge outlet

• Anti-vibration hose