441.00 zł (tax incl.)
Solar set 3 x SR 22 vacuum tube collector with 400 l storage tank
Intended use: Solar kit with hot water cylinder for single-family properties with a daily hot water consumption not exceeding 300-400 litres, which usually corresponds to a family of 6 people.
Solar set with 3 HP 22 tubular-vacuum solar collectors + hot water storage tank. 400 l.
SOLAR KEYMARK certified to take advantage of subsidy programs!
RELEVANT INFORMATION
High-quality solar set with a 400-liter hot water storage tank and 3 SR 22 vacuum tube solar collectors included.
The adopted collector area provides efficient water heating at about 50% of the annual demand. The remaining 50% (winter period) should be provided by using a central heating (central heating) boiler, which is connected to the upper coil of the storage tank, or with the help of an electric heater.
COMPONENTS
- 3 x SR 30 vacuum tube solar collector
- 1 x WEBER W2 400 l enamelled storage tank with two coils
- 1 x WEBER CONTROL CLASSIC solar controller
- 1 x two-way solar pump group
- 1 x diaphragm vessel suspension
- 1 x solar diaphragm vessel (expansion tank) 18 l.
- 1 x propylene glycol, concentrate 10 l.
- 1 x cross coupling fi 22 x 3/4"
- 2 x compression double coupling fi 22
- 1 x compression elbow fi 22 x 3/4"
TECHNICAL PARAMETERS OF THE MAIN ELEMENTS
SR 22 vacuum tube solar collector
- Warranty: 10 years
- Number of vacuum tubes: 22
- Dimensions (W x L x H): 191.7 x 171.5 x 12.5 cm
- Total surface area: 1.77 m²
- Aperture area: 2,04 m²
- Heat carrier: Propylene glycol with water
- Stagnation temperature at 1000W/m², 30°C: 220°C
- Absorption: > 94 %
- Emission: < 8 %
- Permissible installation angle: 15°-50°
- Housing colour: black
- Manifold (inner): red copper
- Collector (outer): aluminium alloy
- Daily efficiency: ≥55%
- Hail resistance: 25 mm
- Maximum operating pressure: 12 bar
- Heat pipe: anti-freeze > -35 degrees
- Connection diameter: 25.4 mm = 1"
- Liquid capacity: 1,5l
- Weight empty with assembly kit: 79.5 kg
- 2 mm thick hail-proof borosilicate glass
- High efficiency thanks to copper absorber sprayed onto the glass
- HEAT PIPE technology to protect the unit from drastic overheating on sunny days when heat extraction from the unit is not possible
- Tubular system made of copper
- Stable support structure made of stainless steel
- Mounting kit for installation of solar panels on pitched roofs
- Special heat pipe protection against unsealing
- Solar Keymark certified
Resource
- Warranty: 4 years
- Capacity: 400 l
- Height: 147 cm
- Diameter with insulation: 75 cm
- Thickness of insulation: 5 cm
- Number of coils: 2
- Bottom coil area: 1,5 m2
- Upper coil area: 1,0 m2
- Maximum pressure: 10 bar
- Corrosion protection: double enamel, magnesium anode
- Casing: skay coat in gray or orange color depending on available batch
WEBER CONTROL CLASSIC controller
- Large liquid crystal display
- Intuitive menu
- Graphic presentation of system operation
- Solar pump speed control function
- Function of controlling the domestic water circulation pump or electric heater
- Collector overheating protection function
- Tank overheating protection function
- Vacation function
- Anti-freeze function
- Counter of energy produced by the system
Solar pump group, two-way
- High-quality solar pump by GRUNFOS / WILO or other manufacturer ( subject to availability)
- Liquid flow volume controller
- 2 filling and drain valves
- 2 thermometers
- 2 ball valves, shut-off
- 2 non-return valves
- Air separator with vent
- Safety valve 6 bar
- Pressure gauge 10 bar
- Wall mounting kit
- Insulated housing
- ¾" GZ connections for quick and easy connection to stainless steel corrugated tubing
Installation fluid
The solar fluid is produced on the basis of propylene glycol, which means that it is completely safe for health in case of possible leakage into the domestic water. The fluid is hygienically certified by the National Institute of Hygiene, which is an additional guarantee of a high level of safety. The liquid is supplied in a 10-liter container in the form of a concentrate with a freezing point lower than -64 °C. After diluting with water, up to 30 l. of ready-to-use mixture is obtained, which is sufficient for typical installations.
Diaphragm vessel (expansion tank), solar 18 l.
The maximum working temperature of the diaphragm vessel included in the set is 120 °C, while the allowable working pressure is as high as 10 bar, which is a guarantee of high stability of operation of the entire system.
Set of connectors
The set is equipped with a system of brass compression connectors that allow the collectors to be efficiently and securely connected to each other, as well as to be connected to pipes.
The set includes:
- 2 x clamping couplings for connecting two adjacent collectors together
- 1 x Compression elbow with a GZ ¾" connection enabling efficient connection to corrugated stainless steel pipes
- 1 x compression cross coupling with a GZ ¾" connection enabling efficient connection to corrugated stainless steel pipes
NOTES: In order to complete the installation of the solar set, it is necessary to obtain, among other things, a mounting kit for the collector, piping and installation fittings necessary to connect the tank to the existing installation. The mounting kit is not included as standard, due to the need to adjust it each time to the type of roofing and roof pitch. All these products can be purchased in our online store.
BENEFITS
- Znikome koszty użytkowania
- Życie zgodne z trendem ECO
- Szybki okres zwrotu inwestycji
- Pełna bezobsługowość
- Długa żywotność
- Distribution class
- H
You might also like
100.00 zł (tax incl.)
Propylene glycol, solar fluid -35°C, 5 l
3,690.00 zł (tax incl.)
Enamelled tank with 2 coils 400 l. WEBER W2 400
201.60 zł (tax incl.)
Solar expansion vessel 18 l
82.50 zł (tax incl.)
Suspension hanger for diaphragm vessel
2,150.00 zł (tax incl.)